Standard HDMinimized hazardsMade in the USA
3DRS Standard HD Flat Grey
$71.96
- High detail for minis, busts and display models.
- Made for DLP, LCD and mSLA printers.
- Made with minimized hazards.
SKU CG45-6-2_4
- Free Standard shipping in the lower 48 on orders of $44 and up
- Made to order in the USA and shipped in 2 to 6 business days
- 30 day returns on unused, unopened items
- Made in an ISO 9001:2015 certified facility
Questions about this product? Email info@3dresinsolutions.com and we reply within 24 hours.
Technical data
Detail you can measure
- Shore D hardness
- 75 to 80
- Elongation at break
- 3 to 4%
- Tensile strength
- 5,500 to 6,200 psi
- Elastic modulus
- 250,000 psi
- Linear shrink
- Under 3%
- Viscosity
- 140 cps
- Reactive range
- 365 to 450 nm
- Printers
- 2k to 12k mono screens
- Formula
- Made with minimized hazards
Typical values for this resin. Results depend on your printer, settings and post processing.
Process
From vat to finished part
-
Step 1
Print
Optimized for 30 to 50 µm layers on 2k to 12k mono printers.Dial in with our Starship calibration test.
-
Step 2
Clean
Agitate in high purity IPA or Rhino Resin Cleaner for no more than 10 to 15 minutes. Skip acetone.
-
Step 3
Dry
Let the part dry completely so it cures evenly.
-
Step 4
UV cure
Give it a 10 minute light cure in your UV station.
Details
About 3DRS Standard HD Flat Grey
3DRS Standard HD Flat Grey
Made with minimized hazards for a safer, more enjoyable 3D printing experience.
Crisp, high detail grey with a flat, non glossy look.
Flat Grey's depth of cure is tuned for 30 to 50 µm layers.
| Flat Grey on the Saturn Ultra 12k | 50 um | |
| Normal Exposure | 2.5 to 3.5 s | |
| Bottom Exposure, non engraved | 35s | |
| Bottom Exposure ultra | 50 to 60 | |
| Transition layers | 20 | |
| Bottom Lift Distance | 3 > | 4 |
| Bottom Lift Speed | 60 mm/m > | 180 mm/m |
| Retract Speed | 180 mm/m > | 60 mm/m |
| Bottom Weight Before print | 1s | |
| Normal Lift Distance | 3 | 4 |
| Normal Lift Speed | 60 mm/m > | 180 mm/m |
| Retract Speed | 180 mm/m > | 60 mm/m |
| wait before print | 1s |
Ideal for 2k to 12k mono screen printers.
Flat Grey works on most DLP and LCD printers, with a reactive range of 365 to 450 nm. It uses matting agents for a better surface finish, so minis and models come out looking real. Fantasy figures, historical dioramas, scale models, it handles them all.
Works on most DLP, LCD and mSLA printers.
NOTE: Parts printed with UV resins are not meant for direct food contact and are not safe to put in your mouth, even when properly dried and cured. Don't print anything for a person or pet who might chew on it or swallow it.
Download the Safety Data Sheet HERE
Storage and use
1. Store it somewhere cool and dark, between 18 and 28°C. Keep the container out of the light so the resin doesn't get light contaminated.
2. Keep it out of direct sunlight while you work.
3. Shake well before use.
4. After printing, clean your prints in high purity IPA or Rhino Resin Cleaner.
5. Use it at 18 to 28°C.
Complete your setup
- Rhino Resin Cleaner: Clean prints with high purity IPA or Rhino Resin Cleaner for a smooth, tack free surface.
- InstantEffect™ One Coat Color and Shade Box Set: Brush color straight onto your resin prints, no primer needed. One coat gives you color and shade.
- HERO HD: If your minis get handled at the table, our toughest tabletop resin flexes instead of snapping.
- Best resin for Elegoo, Phrozen and Anycubic printers: Our guide to picking a resin and starting exposure settings for popular printers.
Common questions
What printers does it work with?
Most DLP, LCD and mSLA resin printers with a reactive range of 365 to 450 nm. It's ideal for 2k to 12k mono screens. The settings table on this page has starting values we tested on a Saturn Ultra 12k, with 2.5 to 3.5 seconds normal exposure at 50 microns.
What layer height should I use?
Flat Grey is tuned for layers between 30 and 50 microns.
Is it good for minis that get handled a lot?
Standard HD is made for crisp, high detail minis and models with a flat, non glossy finish. If your minis see a lot of table time, take a look at HERO HD. It flexes instead of snapping.
How do I clean prints?
Use high purity IPA or Rhino Resin Cleaner. That gets you a smooth, tack free surface.
Is it made in the USA?
Yes. We make Standard HD in South Elgin, Illinois, USA, in an ISO 9001:2015 certified facility.
Does shipping cost extra?
You get free Standard shipping in the lower 48 on orders of $44 and up. Smaller orders, and anything going outside the lower 48, pay the rate shown at checkout.
Complete your setup
Pairs well with
HERO HD Medium Grey
Tough, flexible minis. Cure with UV or heat.
4.4 (22)Rated 4.4 out of 5 from 22 reviews
From $74.95
3DRS InstantEffect™ One Coat Color and Shade Singles
Color and shade in one coat.
5.0 (8)Rated 5.0 out of 5 from 8 reviews
$9.95
Customer reviews
Customer Reviews
Overall rating: 5.0 / 5 from 20 reviews.
Top notch resin. Easy to print, sharp details and low odor.
Crisp details every time.
Very solid product and consistent color.
Amazing resin, fast ship times, consistent color.
Great resin for the price, prints fine details great and comes off the build plate wonderfully. Been using in a fleet of Saturn 4s for months now
Standard HD Flat Grey is my go to resin of choice for all of my large scale figure kits. I always get great results with crisp details. The flat Grey color shows off the details fantastically. Highly recommended.
Always reliable. I rely on 3DRS resins to provide my customers with the best product possible and they always deliver. Not only are their resins top notch, but their customer service is fantastic as well. High quality resins at an adorable price plus made in America. You can't go wrong.
I use lots of this resin in a 50/50 blend with my shop. While the exposure time is a bit long for production it is great as a mix, or where exposure time isn't an issue, and it adds good toughness.
I can count on 3D Resin Solutions to always deliver the best quality resins at incredible prices. Standard HD Flat Grey is my go to resin for large format pieces such as this Frankenstein Bust from Wicked. The resin is fantastic at capturing the details in the sculpts.
This resin is amazing and it is the only kind I use now. It is better value than any other resin I have tried. Also, it is ACMO-free, which is really important if you read up about this issue. A couple tips: 1) Mix it very well, especially if it's been sitting in the cat for a while. 2) Don't over cure it and it will keep a little flexibility and stays much more durable.
I looked for a US made resin for my shop and landed on this. It is an excellent drop in for what I was using.
All of their resins work well for my shop.
Great resins. Fast shipping. Large containers for print multiple printer shops.
Great resin. Highly recommended
It's GRRRRRRRREEEEEAAAAAATTTT!
Great experience all around
I love this resin, looks great, performs well, 10/10 would buy again
Any chance to get Mud is worth it. It is always a quality resin at a value price. Standard HD Flat Grey is my go to resin for most prints these days.
This resin is great and the settings provided on the webpage were spot on. Will definitely buy again.
The stated exposure time is way off. even at the higher of the range given which is 2.5s is WAY too low. It has a similar time as the cool grey color which for me is 3.4s exposure. Besides the incorrect exposure time, the resin itself is great. Not brittle at all and just the right amount of flex/bend.
