Free Standard shipping in the lower 48 on orders of $44 and up

Made in the USA

Made in an ISO 9001:2015 certified facility

Phrozen Sonic Mighty Revo 14K Resin Settings for 3DRS Resins

On the Phrozen Sonic Mighty Revo 14K, start 3DRS HERO HD Medium Grey at 2.3 s per layer at 50 microns, RPG at 2.9 s and Standard HD Dark Cool Grey at 4.6 s. Use 6 burn in layers at 30 s. Every resin colour has its own card below with 30, 50 and 100 micron values.

Last updated November 2, 2026. Starting values; adjust 0.1 to 0.2 s for your printer and conditions. Values come from the 3DRS settings sheet, testing by The 3DRS Team and our research on each printer. Questions? Contact us.

  • Release: Two stage lift
  • Screen: 13320 x 5120
  • XY pixel: 16.8 x 24.8 µm
  • Build volume: 223.8 x 127 x 235 mm
  • File format: ctb, prz

HERO HD RPG Standard HD Platinum Cure Cast Lift and retract FAQ All printers

HERO HD settings on the Phrozen Sonic Mighty Revo 14K

HERO HD Medium Grey

HERO HD Medium Grey exposure and burn in settings on the Phrozen Sonic Mighty Revo 14K, by layer height

Normal layer exposure, starting value

  • 30 µm layer2.1 sRange 2.0 to 2.3 s
  • 50 µm layer2.3 sRange 2.2 to 2.5 s
  • 100 µm layer3.3 sRange 3.2 to 3.5 s

Adjust 0.1 to 0.2 s as needed.

Burn in: 6 layers at 30 s (range 30 to 35 s), 4 transition layers

Shop HERO HD Medium Grey

HERO HD Light Grey

HERO HD Light Grey exposure and burn in settings on the Phrozen Sonic Mighty Revo 14K, by layer height

Normal layer exposure, starting value

  • 30 µm layer1.7 sRange 1.6 to 1.8 s
  • 50 µm layer1.9 sRange 1.8 to 2.0 s
  • 100 µm layer2.9 sRange 2.8 to 3.0 s

Adjust 0.1 to 0.2 s as needed.

Burn in: 6 layers at 27.3 s, 4 transition layers

Shop HERO HD Light Grey

HERO HD Pearl White

HERO HD Pearl White exposure and burn in settings on the Phrozen Sonic Mighty Revo 14K, by layer height

Normal layer exposure, starting value

  • 30 µm layer1.9 sRange 1.8 to 2.0 s
  • 50 µm layer2.1 sRange 2.0 to 2.2 s
  • 100 µm layer3.1 sRange 3.0 to 3.2 s

Adjust 0.1 to 0.2 s as needed.

Burn in: 6 layers at 27.3 s, 4 transition layers

Shop HERO HD Pearl White

HERO HD Sienna

HERO HD Sienna exposure and burn in settings on the Phrozen Sonic Mighty Revo 14K, by layer height

Normal layer exposure, starting value

  • 30 µm layer2.3 s
  • 50 µm layer2.5 s
  • 100 µm layer3.5 s

Adjust 0.1 to 0.2 s as needed.

Burn in: 6 layers at 30 s (range 30 to 40 s), 4 transition layers

Shop HERO HD Sienna

HERO HD Merchant Grey

HERO HD Merchant Grey exposure and burn in settings on the Phrozen Sonic Mighty Revo 14K, by layer height

Normal layer exposure, starting value

  • 30 µm layer2.3 s
  • 50 µm layer2.5 s
  • 100 µm layer3.5 s

Adjust 0.1 to 0.2 s as needed.

Burn in: 6 layers at 30 s (range 30 to 40 s), 4 transition layers

Shop HERO HD Merchant Grey

HERO HD Flesh

HERO HD Flesh exposure and burn in settings on the Phrozen Sonic Mighty Revo 14K, by layer height

Normal layer exposure, starting value

  • 30 µm layer2.3 s
  • 50 µm layer2.5 s
  • 100 µm layer3.5 s

Adjust 0.1 to 0.2 s as needed.

Burn in: 6 layers at 30 s (range 30 to 40 s), 4 transition layers

Shop HERO HD Flesh

RPG settings on the Phrozen Sonic Mighty Revo 14K

RPG Medium Grey

RPG Medium Grey exposure and burn in settings on the Phrozen Sonic Mighty Revo 14K, by layer height

Normal layer exposure, starting value

  • 30 µm layer2.7 sRange 2.6 to 2.8 s
  • 50 µm layer2.9 sRange 2.8 to 3.0 s
  • 100 µm layer3.9 sRange 3.8 to 4.0 s

Adjust 0.1 to 0.2 s as needed.

Burn in: 10 layers at 45 s, 20 transition layers

Shop RPG Medium Grey

Standard HD settings on the Phrozen Sonic Mighty Revo 14K

Standard HD Dark Cool Grey

Standard HD Dark Cool Grey exposure and burn in settings on the Phrozen Sonic Mighty Revo 14K, by layer height

Normal layer exposure, starting value

  • 30 µm layer4.4 sRange 4.3 to 5.3 s
  • 50 µm layer4.6 sRange 4.5 to 5.5 s
  • 100 µm layer5.6 sRange 5.5 to 6.5 s

Adjust 0.1 to 0.2 s as needed.

Burn in: 10 layers at 50 s, 20 transition layers

Shop Standard HD Dark Cool Grey

Standard HD Flat Grey

Standard HD Flat Grey exposure and burn in settings on the Phrozen Sonic Mighty Revo 14K, by layer height

Normal layer exposure, starting value

  • 30 µm layer2.6 sRange 2.5 to 3.0 s
  • 50 µm layer2.5 sRange 2.4 to 2.6 s
  • 100 µm layer3.5 sRange 3.4 to 3.6 s

Adjust 0.1 to 0.2 s as needed.

Burn in: 6 layers at 35 s, 4 transition layers

Shop Standard HD Flat Grey

Platinum Cure Cast settings on the Phrozen Sonic Mighty Revo 14K

These are starting values based on customer reports and similar clear resin data. Run a test print or exposure test first.

Platinum Cure Cast Clear

Platinum Cure Cast Clear exposure and burn in settings on the Phrozen Sonic Mighty Revo 14K, by layer height

Normal layer exposure, starting value

  • 30 µm layer2.5 sRange 2.4 to 2.6 s
  • 50 µm layer2.7 sRange 2.6 to 2.8 s
  • 100 µm layer3.7 sRange 3.6 to 3.8 s

Adjust 0.1 to 0.2 s as needed.

Burn in: 5 layers at 20 s, 5 transition layers

Printing directly on the build plate with no supports? Use about 3 s for 5 burn in layers, with 5 transition layers.

Shop Platinum Cure Cast Clear

Platinum Cure Cast Clear lift, retract and wait settings on the Phrozen Sonic Mighty Revo 14K

Burn in layers

Lift distance, stage 1 (mm)
3
Lift distance, stage 2 (mm)
5
Retract distance, stage 1 (mm)
5
Retract distance, stage 2 (mm)
3
Lift speed, stage 1 (mm/min)
80
Lift speed, stage 2 (mm/min)
180
Retract speed, stage 1 (mm/min)
180
Retract speed, stage 2 (mm/min)
60
Wait before print (s)
1
Wait after print (s)
0
Wait after lift (s)
0
Light intensity (%)
100

Normal layers

Lift distance, stage 1 (mm)
3
Lift distance, stage 2 (mm)
4
Retract distance, stage 1 (mm)
4
Retract distance, stage 2 (mm)
3
Lift speed, stage 1 (mm/min)
80
Lift speed, stage 2 (mm/min)
180
Retract speed, stage 1 (mm/min)
180
Retract speed, stage 2 (mm/min)
80
Wait before print (s)
1
Wait after print (s)
0
Wait after lift (s)
0
Light intensity (%)
100

Platinum Cure Cast print and bake tips

Before you print

  • Settings assume supported prints. With supports, keep the burn in exposure at or under 15 to 20 s.
  • If you print directly on the build plate, use a short burn in of about 3 s for 5 layers with 5 transition layers.

Orientation

  • Print parts at an angle. Large flat areas facing the plate can cup and leave defects.
  • Clear resin can close small holes, most of all holes that run along the Z axis. Orient parts so critical holes do not run straight up.
  • Very small columns are hard to hold. If they fail, slow the lift speed, add a short rest and raise the exposure a little.
  • Take care with thin walls, which can distort.

Post processing (required)

  1. Wash thoroughly in IPA.
  2. Let the part dry completely, overnight or with compressed air and about 3 hours of drying. Parts that are still wet can show surface problems.
  3. UV cure for 10 to 20 minutes.
  4. Bake at 275°F (135°C) for 60 to 80 minutes in a dedicated oven or air fryer, never a kitchen oven used for food.

The bake is what lets platinum silicone cure against the printed part. Without it the silicone will stay uncured where it touches the print.

Limits

  • Made for open molds used with platinum cure silicone.
  • Not recommended for closed or injected molds. In testing, injected silicone stayed uncured even after repeated cure cycles.

Lift, retract and wait settings for the Phrozen Sonic Mighty Revo 14K

Two stage lift and retract. Enter both stages in Lychee or Chitubox. Field names follow Lychee Slicer. Use the same values in the matching fields of your slicer.

Lift, retract and wait settings on the Phrozen Sonic Mighty Revo 14K for HERO HD, RPG and Standard HD (Lychee field names)

Burn in layers

Lift distance, stage 1 (mm)
3
Lift distance, stage 2 (mm)
4
Retract distance, stage 1 (mm)
4
Retract distance, stage 2 (mm)
3
Lift speed, stage 1 (mm/min)
60
Lift speed, stage 2 (mm/min)
180
Retract speed, stage 1 (mm/min)
180
Retract speed, stage 2 (mm/min)
60
Wait before print (s)
30
Wait after print (s)
0
Wait after lift (s)
0
Light intensity (%)
100

Normal layers

Lift distance, stage 1 (mm)
3
Lift distance, stage 2 (mm)
4
Retract distance, stage 1 (mm)
4
Retract distance, stage 2 (mm)
3
Lift speed, stage 1 (mm/min)
60
Lift speed, stage 2 (mm/min)
240
Retract speed, stage 1 (mm/min)
240
Retract speed, stage 2 (mm/min)
60
Wait before print (s)
3
Wait after print (s)
0
Wait after lift (s)
0
Light intensity (%)
100

Phrozen Sonic Mighty Revo 14K resin settings FAQ

What exposure should I use for 3DRS HERO HD on the Phrozen Sonic Mighty Revo 14K?

At 50 microns, start HERO HD Medium Grey at 2.3 s, Light Grey at 1.9 s and Pearl White at 2.1 s. Adjust 0.1 to 0.2 s as needed after a calibration print.

How many burn in layers should I use on the Phrozen Sonic Mighty Revo 14K?

For HERO HD Medium Grey at 50 microns, use 6 burn in layers at 30 s, followed by 4 transition layers.

What lift and retract settings work on the Phrozen Sonic Mighty Revo 14K?

For normal layers, lift 3 mm at 60 mm/min, then 4 mm at 240 mm/min, and retract at 240 mm/min, slowing to 60 mm/min near the vat. The lift and retract settings above list burn in values too.

What about RPG and Standard HD on the Phrozen Sonic Mighty Revo 14K?

At 50 microns, start RPG Medium Grey at 2.9 s, Standard HD Dark Cool Grey at 4.6 s and Standard HD Flat Grey at 2.5 s.

What settings should I use for Platinum Cure Cast on the Phrozen Sonic Mighty Revo 14K?

At 50 microns, start Platinum Cure Cast Clear at 2.7 s with 5 burn in layers at 20 s. These are starting values based on customer reports and similar clear resin data, so run an exposure test first. After printing, wash in IPA, dry fully, UV cure for 10 to 20 minutes and bake at 275°F (135°C) for 60 to 80 minutes before casting platinum silicone.

Need help dialing in your Phrozen Sonic Mighty Revo 14K?

Email info@3dresinsolutions.com with your printer, resin and layer height. See settings for other printers.

3DRS resins are made in the USA.