3DRS Standard HD - Flat Grey
- Domestic Orders over $44 ship free
Crisp, rapid printing, flat high detail grey.
HD Flat Grey enhances the speed and functionality of the 8k (HD) Series, optimizing the surface finish with a refined, Flat non-glossy appearance.
Flat Grey has a depth of cure that is optimized at 30 - 50um layer thickness
Flat Grey on the Saturn Ultra 12k |
50 um | |
Normal Exposure | 2.5s | |
Bottom Exposure Non-engraved | 35s | |
Bottom Exposure ultra |
50-60 | |
Transition layers | 20 | |
Bottom Lift Distance | 3 > | 4 |
Bottom Lift Speed | 60 mm/m > | 180 mm/m |
Retract Speed | 180 mm/m > | 60 mm/m |
Bottom Weight Before print | 1s | |
Normal Lift Distance | 3 | 4 |
Normal Lift Speed | 60 mm/m > | 180 mm/m |
Retract Speed | 180 mm/m > | 60 mm/m |
wait before print | 1s |
Ideal for 2k - 12k mono screen printers.
Standard HD Flat Grey 3D Printing Resin is formulated to optimize functionality across most all DLP/LCD 3D printers with a reactive range from 365-450nm and uses matting agents to enhance surface finish resulting in stunning, highly realistic miniatures and models. Whether you're creating fantasy figurines, historical dioramas, or intricate scale models, this resin delivers the quality you demand.
Suitable for most all DLP / LCD / mSLA 3D printers.
UV Peak Absorption | 365- 405nm |
Tensile Strength | 5500-6000 (psi) |
Elastic Modulus | 250,000 - 280,000 (psi) |
Elongation at Break | 3-4% |
Shore D | 75-80 |
Viscosity | 140 cps |
Density | 1.1g /cm3 |
Linear Shrink | < 3.5% |
NOTE: the final products printed with U.V Resins are not intended or acceptable for direct food contact and are not safe to place in the mouth, even when properly dried and cured. Do not print products for any person or pet who may chew on or otherwise orally ingest the product.
Download Safety Data Sheet HERE
Store & Usage:
1.Store in a cool DARK place between 18-28C - Keep container away from light exposure during storage to avoid light contamination. Store pouches standing up, do not store pouches on their side.
2. Avoid any direct sunlight during usage.
3. Shake well before use.
4. After printing, post wash your print in IPA alcohol with the content of above 90
5. Use at temperature 18-28C