Standard Table Top
- Domestic Orders over $44 ship free
Table Top V2 : Professional High detail 3D Printing Resin ideal for non-brittle miniatures.
Very low shrink, Semi-Flex, non-brittle, great shock + impact resistance.
Standard Table Top V2 prints well at 2.5-3.5s normal exposure on most Mono screen printers and typically works well with pre-supported models.
| Tensile Strength | 2,300 - 2,500 (psi) |
| Elastic Modulus | 100,000 (psi) |
| Elongation at break | 13 % |
| Shore D | 72 |
| Linear Shrink | < 1 % |
| UV Peak Absorption | 365, 405nm |
| Work (j) | 2.52 |
Exposure / Handling Notes:
- Description: Risk of irritation or adverse effects with direct exposure; Inhalation risk with prolonged or repeated exposure. High Misting hazard (inhalation of mist)
- Handling: Nitrile gloves, goggles, vapor mask if prolonged handling; Adequate ventilation required.
- Best For: experienced users with proper equipment and ventilation.
NOTE: the final products printed with U.V Resins are not intended or acceptable for direct food contact and are not safe to place in the mouth, even when properly dried and cured. Do not print products for any person or pet who may chew on or otherwise orally ingest the product.
Download Safety Data Sheet : HERE
Store & Usage:
1.Store in a cool DARK place between 18-28C - Keep container away from light exposure during storage to avoid light contamination.
2. Avoid any direct sunlight during usage.
3. Shake well before use.
4. After printing, please wash your print in alcohol with the content of above 90
5. Use at temperature 18-28C
