3DRS Standard HD Dark Cool Grey

3DRS Standard HD Dark Cool Grey

Made with minimized hazards for a safer, more enjoyable 3D printing experience.

Ideal for 2k to 14k mono screen printers.

This is our go to resin for high detail minis and models at a good price. It's made in the USA with no fillers, and it gives you great detail and accuracy with good toughness.

Standard HD picks up the smallest details in your file, so your minis and models come out sharp and realistic. Fantasy figures, historical dioramas, scale models, it handles them all.

If you want an affordable resin that still nails the detail, Dark Cool Grey is a great pick.

Works on most DLP, LCD and mSLA printers. Normal exposure is 4 to 5 s at 50 µm.

Dial in your settings with our 3DRS Starship and Chip Test.

NOTE: Parts printed with UV resins are not meant for direct food contact and are not safe to put in your mouth, even when properly dried and cured. Don't print anything for a person or pet who might chew on it or swallow it.

Download the Safety Data Sheet HERE

Storage and use
1. Store it somewhere cool and dark, between 18 and 28°C. Keep the container out of the light so the resin doesn't get light contaminated. Store pouches standing up, not on their side.
2. Keep it out of direct sunlight while you work.
3. Shake well before use.
4. After printing, clean your prints in high purity IPA or Rhino Resin Cleaner.
5. Use it at 18 to 28°C.

Complete your setup

• Rhino Resin Cleaner: Clean prints with high purity IPA or Rhino Resin Cleaner for a smooth, tack free surface.
• InstantEffect™ One Coat Color and Shade Box Set: Brush color straight onto your resin prints, no primer needed. One coat gives you color and shade.
• HERO HD: If your minis get handled at the table, our toughest tabletop resin flexes instead of snapping.
• Best resin for Elegoo, Phrozen and Anycubic printers: Our guide to picking a resin and starting exposure settings for popular printers.

Common questions

What printers does it work with?
Most DLP, LCD and mSLA resin printers, and it's ideal for 2k to 14k mono screens. Start around 4 to 5 seconds normal exposure at 50 microns, then dial it in with our Starship and Chip calibration tests.

Is it good for minis that get handled a lot?
It's made for high detail at a good price, with good toughness for minis and models. If your minis see a lot of table time, take a look at HERO HD. It flexes instead of snapping.

How do I cure it?
Clean your prints first, then give them about a 10 minute light cure.

How do I clean prints?
Use high purity IPA or Rhino Resin Cleaner. That gets you a smooth, tack free surface.

Is it made in the USA?
Yes. We make Standard HD in South Elgin, Illinois, USA, in an ISO 9001:2015 certified facility.

Does shipping cost extra?
You get free Standard shipping in the lower 48 on orders of $44 and up. Smaller orders, and anything going outside the lower 48, pay the rate shown at checkout.