Standard Table Top

Standard Table Top


Size
Regular price$149.95
/
Shipping calculated at checkout.
  • Domestic Orders over $44 ship free

High detail 3D Printing Resin ideal for non-brittle miniatures and models.

Semi-Flex, non-brittle, good shock + impact resistance. 

Standard Table Top prints well at 3.4 - 4s normal exposure on most Mono screen printers and typically works well with pre-supported models. Post wash in high purity IPA to remove uncured resin for 3-5 minutes. Do not allow prints to soak for extended periods of time in IPA, let dry then promptly post cure for minimum 20-30 minutes on all sides. The material will not become brittle with extended post curing times. 

Tensile Strength 2,300 - 2,500 (psi) 
Elastic Modulus  100,000 (psi)
Elongation at break 13 %
Shore D 72
Linear Shrink 3%
UV Peak Absorption  365, 405nm
Work (j) 2.52



NOTE: the final products printed with U.V Resins are not intended or acceptable for direct food contact and are not safe to place in the mouth, even when properly dried and cured. Do not print products for any person or pet who may chew on or otherwise orally ingest the product.

Download Safety Data Sheet : HERE

Store & Usage:
1.Store in a cool DARK place between 18-28C - Keep container away from light exposure during storage to avoid light contamination. 
2. Avoid any direct sunlight during usage. 
3. Shake well before use.
4. After printing, please wash your print in alcohol with the content of above 90
5. Use at temperature 18-28C

 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You may also like