Standard Table Top
- Domestic Orders over $44 ship free
High detail 3D Printing Resin ideal for non-brittle miniatures and models.
Semi-Flex, non-brittle, long lasting prints.
Standard Table Top prints well at 3.5-4s normal exposure on most Mono screen printers and typically works well with pre-supported models.
Standard Table Top features very low odor, fine detail, with good Shock + Impact Resistance.
| Tensile Strength | 2,300 - 2,500 (psi) |
| Elastic Modulus | 100,000 (psi) |
| Elongation at break | 13 % |
| Shore D | 72 |
| Linear Shrink | 3% |
| UV Peak Absorption | 365, 405nm |
| Work (j) | 2.52 |
NOTE: the final products printed with U.V Resins are not intended or acceptable for direct food contact and are not safe to place in the mouth, even when properly dried and cured. Do not print products for any person or pet who may chew on or otherwise orally ingest the product.
Download Safety Data Sheet : HERE
Store & Usage:
1.Store in a cool DARK place between 18-28C - Keep container away from light exposure during storage to avoid light contamination.
2. Avoid any direct sunlight during usage.
3. Shake well before use.
4. After printing, please wash your print in alcohol with the content of above 90
5. Use at temperature 18-28C
Other Links:
CREDIT TO DESIGNER: The Minis we print are from Artisan Guild unless otherwise stated in the photo. Artisan Guild makes some amazing stuff, check them out here: https://www.patreon.com/ArtisanGuild
